NITROUS OXIDE SYSTEMS 0025 Big Shot Single Stage Upgrade Kits

Description

Fitment and Product Information
Big Shot Single Stage Upgrade Kits
Brandname:
NITROUS OXIDE SYSTEMS
Part Number:
0025
Overview:
The NOS Big Shot systems use a special “fogging� plate design that vastly improves nitrous flow, fuel atomization and mixture distribution. This Big Shot plate utilizes a unique spray bar that is equipped with tiny orifices. These are precisely located to efficiently dispense a powerful nitrous/gasoline mixture for unbelievable horsepower. An NOS Big Shot system can create as much as 300 extra horsepower. Power output is adjustable from 200 - 300 horsepower simply by changing fuel and nitrous jets.
Single stage Big Shot systems incorporate a NOS® Pro Shot nitrous solenoid with -6 AN nitrous supply line. Systems include a variety of power jets , 10 lb. nitrous bottle, 1/2� fogging plate, filters, fittings for fuel and nitrous, switches and all electrical and other hardware necessary for installation. Universal systems are available as well as kits dedicated specifically to Ford 5.0L V8 applications. Systems for import applications are listed separately in this catalog. Other kits are offered that enable one to upgrade a NOS Cheater system to Big Shot nitrous power. Big Shot fogging plates are available separately.
Actual performance gains will vary depending on the engine’s condition, configuration and jetting of nitrous system. Optional power jets are available for a variety of horsepower settings. The amount of power you obtain from a system is dependent on the engine it is being installed on.
Features:
Unique Fogging Plate Design
Vastly Improves Nitrous Flow
Improves Fuel Atomization
Improves Mixture Distribution
Advanced EDM Technology
Highly Efficient Nitrous System
Includes Necessary Electrical Hardware
Specs:
Brand: NOS
Fuel Solenoid: Cheater
Included Jetting Horsepower: 190, 225, 275, 300
Jet Style: Flare
Max Horsepower: 300
Nitrous Solenoid: Super ProShot
Number of Solenoids: 2
Plate Flange: 4150
Product Type: NOS Kit
System Style: Wet
Tech Resources:
Big Shot systems are designed for use on engines that have been extensively modified and intended primarily for competition applications. To supply the proper amount of fuel to the carburetor and Big Shot system, a fuel pump must be used that is designed to operate between 5 and 10 PSI, with a flow rate of at least 0.1 gallons per horsepower per hour at 6 PSI.
High cylinder pressures are generated with the use of these kits, and this greatly increases the load on the pistons, rods, crank and block. Use of high strength forged components, splayed mains, and a four-bolt block, with cylinder head studs are highly recommended. use only a high quality racing ignition system with timing control.
Intake manifolds that have an individual opening for each carburetor throttle bore should not be used. Open pluenum, single plane, or tunnel ram manifolds work best. Racing gasoline is required.
WARNING
: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov