OPM JDSU VIAVI OLP-85 Medidor de Potencia Optica Power Meter

Description

Product Description
The SmartClass Fiber OLP-85combine pass/fail fiber inspection
and optical power measurement
(OPM)
into one
solution.
With a 100 dB dynamic range, the OLP-85
handheld optical power
meters are professional, versatile,
and compact
instruments perfect for any fiber-optic network power or loss
test applications.
Their high accuracy over the entire range means that the OLP-85
perfectly fit
applications
where
low
power
or very high
power needs to be measured.
Packaging & Shipping
General information; 33*26*18cm for the outer carton box
General
Display
3.5-in color LCD touch screen
, 4:3 ratio
Data readout
Via USB interface
Remote control capability
Via USB or Ethernet
Inspection functions
Live, freeze, store end-face image, auto pass/fail
Optical interfaces
2.5 mm UPP for FC/SC/ST/DIN/E2000
connector types
1.25 mm UPP for LC and MU connector types
(optional)
Electrical interfaces
USB 2.0 (2 x host, type A, 1 x device, Micro-B)
Power source
AC adaptor, 8x AA alkaline, or rechargeable
LiON battery pack
Power mode
Active, auto-Off (programmable)
Dimensions (H x W x D)
OLP-85
208 x 112 x 64 mm (8.2 x 4.4 x 2.5 in)
OLP-85P
208 x 153 x 64 mm (8.2 x 6.0 x 2.5 in)
Weight
OLP-85
750 g (1.6 lb)
OLP-85P
850 g (1.85 lb)
Detailed Images
The operation is simple, the success rate is 100%, and the attenuation is small.
SC fast connector for Telecom special cold connector
1. structure is embedded fiber structure. There is no embedded fiber and matching paste inside the device. After installing and clamping optical fiber, it can check the optical fiber end with magnifying glass and avoid it.
The loss of optical fiber connection is large. The axial band positioning mechanism, during the clamping process, the optical fiber will not move forward.
2. the reliability of the optical fiber clamping is very good. The fiber gripper components are made of elastic metal materials, and there is no problem of aging of the plastic elements. Temperature change to fiber clamping force
No effect. In addition, the device has an anti loose structure inside the device, the device anti vibration, and the anti drop performance is very good.
3., the connection stability is good. The optical fiber butt joint has axial adhesion force. When the optical fiber is butt joint, the two fiber end face clearance is almost zero, so the connection loss is usually less than or equal to 0.3dB.
Even less than or equal to 0.1db. because of no use of optical fiber matching paste, there is no match paste loss, pollution has been aging. In addition, the reliability of the optical fiber clamping is very good and is determined.
The continuity is very good.
4., the insertion loss is small. Since the device is designed according to the non embedded optical fiber structure, the optical fiber only has one contact point, so the connection loss is generally less than that of the existing optical fiber fast connector.
5, the online tensile force of the optical fiber fast connector has no effect on the connection loss. The axial force of the device directly affects the shell of the device, and the ceramic pin of the connector is not pulled.
It does not affect the butt effect of the fiber, so it has no effect on the loss of the connector.
6, the connector has excellent performance, and the installation is very simple. It does not need special construction tools to complete the installation.
7, it has good maintenance and simple installation and maintenance.
8, the installation speed is fast, the device has a unique optical fiber guiding mechanism, and it is very quick and convenient to wear optical fiber.